ENGG 390 Reports (MEM Students)
Degree Program
M.E.M
Sponsor
Amphenol - Nashua, NH
Faculty Advisor
Professor Bish
Document Type
Report
Publication Date
9-2022
Abstract
As the Mechanical Integrity Intern at Amphenol this summer, I designed and assembled a mated bulk resistance measurement fixture. The fixture simplifies a previously difficult and time-consuming measurement, and it reduces the required number of operators from three to one. Probes with smaller tips were designed and assembled for the fixture to match the small size of the compliant pins. A comparison of the Gage Repeatability and Reproducibility studies using the fixture and the previous method shows that the fixture reduces variability. A detailed drawing package with manufacturer and part information was completed to enable future replication of the design.
Level of Access
Restricted: Campus/Dartmouth Community Only Access
Dartmouth Digital Commons Citation
Skaug, Olivia, "Designing and Implementing a Mated Bulk Resistance Measurement Fixture for Amphenol's Mechanical Integrity Lab" (2022). ENGG 390 Reports (MEM Students). 167.
https://digitalcommons.dartmouth.edu/engs390/167
Restricted
Available to Dartmouth community via local IP address.
